LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P2636 >> Component Testing

Component Testing

  1. Ignition OFF, remove the left fuel level sender from the fuel tank.
  2. Connect a DMM between terminal A and terminal D.
  3. Verify the secondary fuel level sender resistance remains within 40-250 ohms and changes smoothly while moving the float arm from stop to stop.
    • If the resistance is outside the specified range or changes erratically while moving the float arm from stop to stop, replace the fuel level sender.
scientia non olet · About LEMON Manuals