LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P2107 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the DTC information with a scan tool for 30 seconds. DTC P2107 should not set.
    • If DTC P2107 sets, replace the ECM.
  2. If the vehicle passes the Circuit/System Verification Test, then operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records List.
scientia non olet · About LEMON Manuals