LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Catalytic Converter Heat Shield Replacement >> Installation Procedure

Installation Procedure

Fig 1: Identifying Catalytic Converter Heat Shield (2 Of 2)
G04843570Courtesy of SUZUKI OF AMERICA CORP.
  1. Position the catalytic converter heat shield, and insert the catalytic converter heat shield between the underbody and the dash panel heat shield.
  2. Install the NEW rivets.
    Fig 2: Identifying New Catalytic Converter Rivets
    G04843571Courtesy of SUZUKI OF AMERICA CORP.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the fuel tank strap bolt.

    Tightening torque 

    Tighten the bolt to 25 N.m (18 lb ft). 

    Fig 3: Identifying Fuel Tank Strap Bolt
    G04843572Courtesy of SUZUKI OF AMERICA CORP.
  4. If the vehicle is equipped with AWD, install the propeller shaft underbody guard loop and bolts.

    Tightening torque 

    Tighten the bolts to 25 N.m (18 lb ft). 

  5. Install the muffler assembly. Refer to Installation Procedure .
scientia non olet · About LEMON Manuals