LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Repair Instructions >> Starter Motor Replacement >> Removal Procedure

Removal Procedure

Fig 1: Identifying Starter Solenoid BAT Terminal Nut
G04844199Courtesy of SUZUKI OF AMERICA CORP.
  1. Disconnect the negative battery cable. Refer to REMOVAL PROCEDURE .
  2. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  3. Remove the front catalytic convertor. Refer to REMOVAL PROCEDURE .
  4. Remove the starter solenoid BAT terminal nut.
    Fig 2: Identifying Engine Harness Electrical Connector
    G04844200Courtesy of SUZUKI OF AMERICA CORP.
  5. Disconnect the engine harness electrical connector.
    Fig 3: Identifying Starter Bolts (1 Of 2)
    G04844201Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the starter bolts and starter.
scientia non olet · About LEMON Manuals