LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel And Column >> Repair Instructions >> Ignition Lock Cylinder Replacement >> Installation Procedure

Installation Procedure

Fig 1: Rotating Lock Cylinder In Housing
G04843999Courtesy of SUZUKI OF AMERICA CORP.
NOTE: If you are installing a new lock cylinder, refer to KEY AND LOCK CYLINDER CODING .
  1. Position the lock cylinder in the run position. Insert the cylinder into the lock housing.
  2. Rotate the lock cylinder in the housing. Verify proper rotation.
  3. Install the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling .
  5. Connect the negative battery cable. Refer to INSTALLATION PROCEDURE .
scientia non olet · About LEMON Manuals