BASS Data List
BASS DATA LIST
| BASS High During Learn | The scan tool displays NO/YES. If a short to battery positive voltage is detected in the stop lamp switch signal circuit during calibration, then the scan tool will display YES. |
| BASS Learned | The scan tool displays NO/YES. When the brake pedal position sensor has been calibrated correctly, the scan tool will display YES. |
| BASS Low During Learn | The scan tool displays NO/YES. If a short to ground is detected in the stop lamp switch signal circuit during calibration, then the scan tool will display YES. |
| BASS Moved During Learn | If the brake pedal is moved during calibration, the scan tool will display YES. |
| BASS Valid | The scan tool displays NO/YES. When the brake pedal position sensor has been calibrated correctly, the scan tool will display YES. |
| Brake Lamp | The scan tool displays ON/OFF. When the brake is applied the scan tool will display ON. |
| Current Position | The scan tool displays COUNTS. The brake pedal position sensor applies a varying voltage to the BCM. The BCM then calculates the current position of the brake pedal. |
| Learned Home Position | The scan tool displays COUNTS. The BCM displays the home position of the brake pedal position sensor. |
| Learn in Progress | The scan tool displays NO/YES. When the brake pedal position sensor is being calibrated, the scan tool will display YES. |