Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Connect the audio system electrical connector and the antenna cable.

Fig 1: Audio System Trim Molding

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the audio system with the screws.
Tighten: Tighten the audio system screws to 6 N.m (53 lb in).

Fig 2: Audio System Screws

Courtesy of GENERAL MOTORS CORP.

Install the audio system trim molding.
Connect the negative battery cable.
Enter the audio security system 4-digit code. Refer to Radio/Audio System Description and Operation .