Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Cable Nuts | 4.5 N.m | 40 lb in |
| Battery Carrier Tray Lower Bolts | 20 N.m | 15 lb ft |
| Battery Carrier Tray Upper Bolts | 20 N.m | 15 lb in |
| Battery Retainer Clamp-to-Battery Rod Nuts | 4 N.m | 35 lb in |
| Engine Mount Lower Bracket Bolts (1.2L) | 41 N.m | 30 lb ft |
| Front Bearing Plate Screws | 8 N.m | 71 lb in |
| Fuel Rail Retaining Bolts | 20 N.m | 15 lb in |
| Generator Adjusting Bolt (1.2L) | 7 N.m | 62 lb ft |
| Generator Battery Lead Nut | 15 N.m | 11 lb ft |
| Generator Brush Holder Screws | 12 N.m | 106 lb in |
| Generator Drive and End Bearing Nut | 81 N.m | 60 lb ft |
| Generator Drive End Bearing Nut | 81 N.m | 60 lb ft |
| Generator Lower Bracket Mounting Bolt (1.2L) | 28 N.m | 21 lb ft |
| Generator Lower Bracket-to-Generator Nuts | 25 N.m | 18 lb ft |
| Generator Pulley Nut (1.2L) | 110 N.m | 81 lb ft |
| Generator Shackle Bracket Bolt | 25 N.m | 18 lb ft |
| Generator Through-Bolts | 10 N.m | 89 lb in |
| Harness Ground Bolt | 41 N.m | 30 lb ft |
| Reaction Rod Bolt and Nut (1.2L) | 83 N.m | 61 lb ft |
| Starter Field Coil Connector Nut | 8 N.m | 71 lb in |
| Starter Mounting Bolts (1.2L) | 23 N.m | 17 lb ft |
| Starter Mounting Bolts (1.4L/1.5L SOHC and 1.4L/1.6L DOHC) | 43 N.m | 32 lb ft |
| Starter Solenoid Assembly Screws | 8 N.m | 71 lb in |
| Starter Solenoid Nuts | 15 N.m | 11 lb ft |
| Starter Through-Bolts | 6 N.m | 53 lb in |