LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Theft Deterrent System >> Repair Instructions >> Programming Theft Deterrent System Components (Tech 2) >> Immobilizer Programming Procedure

Immobilizer Programming Procedure

  1. Turn the ignition switch to the ON position.
  2. Install the scan tool.
  3. Select IMMOBILIZER PROGRAMMING FUNCTION from the BODY menu.
  4. Follow the scan tool instructions with each key until all keys are programmed.
  5. Cycle the ignition 3 times as indicated by the scan tool.
  6. Turn the ignition to the LOCK position, disconnect the scan tool and test all the keys.
  7. If any key does not function, perform this procedure again with all keys.
  8. If any key does not accept the programming, replace it with a new key and perform this procedure again with all the keys.
scientia non olet · About LEMON Manuals