LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> Transmission >> Transfer Case >> Repair Instructions >> Reduction Drive Gear Assembly Disassembly and Reassembly >> Reassembly

Reduction Drive Gear Assembly Disassembly and Reassembly: Reassembly

  1. Clean all components thoroughly, inspect them for any abnormality and replace with new one as necessary.
  2. Install bearings (1) to reduction drive gear (2) using special tool, bearing puller (3) and hydraulic press (4).

    Special Tool 

    (A): 09913-85230 

    Fig 1: Installing Bearings To Reduction Drive Gear
    G04847441Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals