LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Ignition Switch Cylinder Assembly Removal and Installation (Non-Keyless Start Model) >> Installation

Ignition Switch Cylinder Assembly Removal and Installation (Non-Keyless Start Model): Installation

  1. Install ignition switch cylinder assembly as follows.
    1. Turn ignition key to "ACC" position.
    2. In this state, push ignition switch cylinder assembly into steering lock assembly till it clicks.
  2. (Immobilizer model)

    Install immobilizer control module referring to ICM REMOVAL AND INSTALLATION .

  3. Install upper and lower cover and screws.
  4. Connect negative (-) cable to battery.
  5. Enabling air bag system referring to EXCEPT ADVANCED AIR BAG or ADVANCED AIR BAG .
  6. (Immobilizer model)

    If ignition switch cylinder assembly (that is ignition key) has replaced, register ignition key transponder code to ECM referring to REGISTRATION OF THE IGNITION KEY .

scientia non olet · About LEMON Manuals