Secondary Parameters And Enable Conditions
WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft synchronization:
This diagnostic is inhibited if any of the following DTC's are present:
- Intake CAM error
0 < Engine Speed calculated on last crankshaft tooth period < 416 rpm
Ignition Key OFF
Signal invalid/CAM not Valid for CRK synchronization:
This diagnostic is inhibited if any of the following DTC's are present:
- Intake CAM error
0 < Engine Speed calculated on last crankshaft tooth period < 416 rpm
Ignition Key OFF
Camshaft segment period too short:
This diagnostic is inhibited if any of the following DTC's are present:
- Intake CAM error
0 < Engine Speed calculated on last crankshaft tooth period < 416 rpm
Signal missing:
This diagnostic is inhibited if any of the following DTC's are present:
- Intake CAM error
0 < Engine Speed calculated on last crankshaft tooth period < 416 rpm