LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Electric Throttle Body Assembly On-Vehicle Inspection >> Throttle Actuator (Motor) Check

Throttle Actuator (Motor) Check

  1. Turn OFF ignition switch.
  2. Disconnect connector from electric throttle body assembly.
  3. Measure resistance between "M1" terminal (1) and "M2" terminal (2) of electric throttle body assembly.

    If measured resistance is out of specified value, replace electric throttle body assembly.

    Throttle actuator (motor) resistance 

    0.3 - 100 Ω at 20 °C, 68 °F 

    Fig 1: Measuring Resistance Between M1 Terminal And M2 Terminal Of Electric Throttle Body Assembly
    G04846706Courtesy of SUZUKI OF AMERICA CORP.