LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis (Single Page) >> Suspension >> Wheels & Tire System >> Tire Pressure Monitoring System >> Diagnostic Information and Procedures >> Scan Tool Data >> Scan Tool Data Definition >> ID code Regi status (ID code registration status):

ID code Regi status (ID code registration status):

This parameter indicates whether or not it has been registered in BCM after performing the procedure to register the ID code of the tire pressure sensor in BCM to check.

In progress: Indicates that registration of the ID code is being executed

Complete: Indicates that only when the ID code of each tire pressure sensor has been registered in BCM within a specified work time

Time out: Indicates that the ID code of each tire pressure sensor has not been registered in BCM within a specified work time

Incomplete: Indicates that BCM has not received the ID code of the each tire pressure sensor (indicates normally)

scientia non olet · About LEMON Manuals