Connector: C01

ECM COUPLER TERMINALS REFERENCE - CONNECTOR C01

Terminal	Wire color	Circuit	Terminal	Wire color	Circuit
1	BLU/YEL	Fuel injector No.1	31	BLK	Ground for A/F sensor heater
2	BLU/WHT	Fuel injector No.2	32	RED	Heater output of A/F sensor
3	-	-	33	BLK	Shield ground for TP sensor circuit
4	-	-	34	-	-
5	-	-	35	-	-
6	-	-	36	BLU	CKP sensor (-)
7	GRN	P/S pump pressure switch signal	37	BLK	A/F sensor signal (-)
8	-	-	38	WHT	A/F sensor signal (+)
9	-	-	39	BLK/RED	Ground for HO2S
10	-	-	40	WHT	TP sensor (sub) signal
11	BRN	Oxygen signal of HO2S	41	BLK	Ground for TP sensor
12	RED/BLU	A/C refrigerant pressure sensor signal	42	YEL	IMT valve actuator (+)
13	BLU/BLK	EVAP canister purge valve output	43	YEL/BLK	IMT valve actuator (-)
14	GRY/RED	Output of 5 V power source for A/C refrigerant pressure sensor	44	YEL	Output of throttle actuator
15	BLK	Ground for ECM	45	BLU	Output of throttle actuator
16	BLU/RED	Fuel injector No.3	46	-	-
17	BLU/ORN	Fuel injector No.4	47	RED/BLU	Heater output of HO2S
18	GRN	Ignition coil No.4	48	BLK/ORN	Ground for ECM
19	GRN/BLK	Ignition coil No.3	49	WHT	CAN (low) communication line (active low signal) to TCM
20	GRN/WHT	Ignition coil No.2	50	RED	CAN (high) communication line (active high signal) to TCM
21	GRN/YEL	Ignition coil No.1	51	PNK	CKP sensor (+)
22	YEL/GRN	Starting motor signal	52	RED/YEL	CMP sensor signal
23	-	-	53	RED	Output for 5 V power source of TP sensor
24	LT	GRN ECT sensor signal	54	GRN	TP sensor (main) signal
25	LT GRN/BLK	IAT sensor signal	55	-	-
26	PNK/BLK	MAF sensor signal	56	RED	Knock sensor signal
27	GRY	Ground for MAF sensor	57	GRY/BLU	Ground for sensors
28	BLU/YEL	Generator control signal output	58	BLK/ORN	Ground for ECM
29	BLK	Ground for ECM	59	-	-
30	BLK	Ground for ECM	60	-	-