LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> SX4 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0481: Fan 2 Control Circuit (Non-EVAP-Leak-Check Model) >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. With ignition switch turned OFF, connect scan tool.
  2. Turn ON ignition switch and clear DTC by using scan tool.
  3. Start engine and run it at idle speed.
  4. Select blower selector at 1st position or more.
  5. Turn on A/C switch.
  6. Wait until A/C condenser fan stops.
  7. Check DTC and pending DTC.
scientia non olet · About LEMON Manuals