LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> Grand Vitara Base, AWD, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Ignition Switch Cylinder Assembly Removal And Installation (Without Keyless Start System) >> Installation

Ignition Switch Cylinder Assembly Removal And Installation (Without Keyless Start System): Installation

  1. Install ignition switch cylinder assembly as follows.
    1. Turn ignition key to "ACC" position.
    2. In this state, push ignition switch cylinder assembly into steering lock assembly till it clicks.
  2. Install immobilizer control module (ICM) referring to IMMOBILIZER CONTROL MODULE (ICM) REMOVAL AND INSTALLATION .
  3. Install upper and lower cover and screws (1).
    CAUTION: When installing covers, be careful so that each lead wire is not caught between covers.
    Fig 1: Identifying Steering Column Screws
    G04809090Courtesy of SUZUKI OF AMERICA CORP.
  4. Enabling air bag system referring to ENABLING AIR BAG SYSTEM (ADVANCED AIR BAG) or ENABLING AIR BAG SYSTEM (EXCEPT ADVANCED AIR BAG) .
scientia non olet · About LEMON Manuals