LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> Grand Vitara Base, AWD, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Diagnostic Information And Procedures >> Starting Motor Performance Test >> Hold-In Test

Hold-In Test

  1. While connected as above with plunger out, disconnect negative lead (2) from terminal "M" (1).
  2. Check that plunger and pinion remain out. If plunger and pinion return inward, replace magnetic switch.
    Fig 1: Testing Starting Motor - Hold-In Test
    G04807655Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals