LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> Aerio Base, FWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instruction >> Engine Coolant Temperature (ECT) Sensor Removal and Installation >> Removal

Engine Coolant Temperature (ECT) Sensor Removal and Installation: Removal

  1. Disconnect negative cable from battery.
  2. Drain coolant referring to COOLING SYSTEM FLUSH AND REFILL .
  3. Disconnect connector from ECT sensor (1).
    Fig 1: Disconnecting Connector From ECT Sensor
    G04589661Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove ECT sensor from water outlet cap.
scientia non olet · About LEMON Manuals