Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Tie-rod end castle nut | 35 - 55 | 3.5 - 5.5 | 25.5 - 39.5 |
| Wheel nut | 85 | 8.5 | 61.5 |
| Tie-rod end lock nut | 45 | 4.5 | 32.5 |
| Gear box mounting bolt | 55 | 5.5 | 40.0 |
| Gear box cylinder pipe flare nut | 25 | 2.5 | 18.0 |
| Gear box high and low pressure pipe flare nut | 35 | 3.5 | 25.0 |
| Steering shaft upper and lower joint bolt | 25 | 2.5 | 18.0 |
| Tie-rod ball nut | 85 | 8.5 | 61.5 |
| Pump cover bolt | 28 | 2.8 | 20.0 |
| Pressure switch | 28 | 2.8 | 20.0 |
| Plug | 60 | 6.0 | 43.5 |
| Suction connector bolt | 12 | 1.2 | 8.5 |
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION .