LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2007 >> Aerio Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P1600: Serial Communication Problem Between ECM and TCM >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. Connect scan tool to DLC with ignition switch turned OFF.
  2. Turn ON ignition switch and clear DTC using scan tool.
  3. Start engine and run it at idle for 5 min. or more.
  4. Check DTC and pending DTC.
scientia non olet · About LEMON Manuals