DTC Confirmation Procedure
NOTE:
Check to make sure that the following conditions are satisfied when using this "DTC Confirmation Procedure".
- Altitude (barometric pressure): 2500 m, 8202 ft or less (560 mmHg, 75 kPa or more)
- Engine coolant temp. at engine start: between -10°C and 30°C (14°F and 86°F)
- With ignition switch turned OFF, connect scan tool.
- Turn ON ignition switch, clear DTC using scan tool.
- Start engine and warm up to normal operating temperature. (ECT approx. 70 - 205°C, 158 - 401°F)
- Run engine at idle speed for 1 min. or more.
- Check DTC and pending DTC.