LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2006 >> XL-7 Base, RWD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Repair Instructions >> Input Shaft Speed Sensor Inspection

Input Shaft Speed Sensor Inspection

  1. Disconnect negative cable at battery.
  2. Hoist vehicle.
  3. Disconnect input shaft speed sensor connector.
  4. Check input shaft speed sensor (1) for resistance between terminals of sensor.

    Input shaft speed sensor resistance 

    Standard: 560 - 680 Ω (at 20°C (68°F)) 

    Fig 1: Identifying Input Shaft Speed Sensor
    G04722606Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals