LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> Steering >> Power Steering >> Power Assisted Steering System >> Diagnostic Information and Procedures >> DTC C2203: Testing Current >> Test Description

Test Description

The numbers below refer to the step numbers on the diagnostic table.

  1. 2. Tests if the Commanded Current parameter is at the specified value in the active state.
  2. 3. Tests if the resistance of the VES actuator is in the specified range.
  3. 7. Tests the high effort control circuit for an open or short to voltage.
  4. 8. Tests the low effort control circuit for a short to ground.
  5. 10. Tests for poor connections at the VES actuator harness connector.
scientia non olet · About LEMON Manuals