Secondary Parameters And Enable Conditions

Additional specific conditions for "mechanical stop not reached (activated position = STOP_ON diagnose):

• IGK "ON"
• No VIM sensor electrical error
• No VIM actuator electrical error
• Ambient temperature > -9.75 °C
• Time after exit start to after start > 1 s
• 10.968 V < battery voltage < 16.046 V
• Low pressure available in the intake manifold and this for a sufficient time (to insure sufficient vacuum in the vacuum reservoir)
• The flap had sufficient time to reached the set point value
• No VIM "mechanical stop not reached (deactivated position = STOP_OFF) error
• Intake air temperature > 0 °C
• Number of VIM activations since engine start >= 1
• VIM activated position requested

Additional specific conditions for "mechanical stop not reached (deactivated position = STOP_OFF diagnose):

• IGK "ON"
• No VIM sensor electrical error
• No VIM actuator electrical error
• Ambient temperature > -9.75 °C
• Time after exit start to after start > 1 s
• 10.968 V < Battery voltage < 16.046 V
• Low pressure available in the intake manifold and this for a sufficient time (to insure sufficient vacuum in the vacuum reservoir)
• The flap had sufficient time to reached the set point value
• No VIM "mechanical stop not reached (activated position = STOP_ON) error
• Intake air temperature > 0 °C
• VIM deactivated position requested