Malfunction Criteria And Threshold Value(S)

plausibility error between TPS 1 and MAF

Timer variable for TPS-MAF plausibility check ≥ 0.3 s

And

→ The MAF sensor can be selected for the TPS _MAF plausibility check and MAF error was detected

→ or The MAF sensor can't be selected for the TPS _MAF plausibility check and MAP error was detected

Or

=> Integrated error between Mass air flow measured by the main load sensor and Substitute mass air flow calculated with Throttle flap opening angle of position sensor 1 (TPS ratio error) >= Integrated error between Mass air flow measured by the main load sensor and Substitute mass air flow calculated with Throttle flap opening angle of position sensor 2 (TPS ratio error)

=> Then an TPS_MAF error is detected

Integrated error between Measurement Value and substitute value > 60

=> Then an TPS_MAF error is detected