Secondary Parameters And Enable Conditions

Camshaft synchronization:

This diagnostic is inhibited if any of the following DTC's are present:

• Intake CAM error

  0 < Engine Speed calculated on last crankshaft tooth period < 416 rpm

  Ignition Key OFF

  Signal invalid/CAM not Valid for CRK synchronization:

  This diagnostic is inhibited if any of the following DTC's are present:

• Intake CAM error

  0 < Engine Speed calculated on last crankshaft tooth period < 416 rpm

  Ignition Key OFF

  Camshaft segment period too short:

  This diagnostic is inhibited if any of the following DTC's are present:

• Intake CAM error

  0 < Engine Speed calculated on last crankshaft tooth period < 416 rpm

  Signal missing:

  This diagnostic is inhibited if any of the following DTC's are present:

• Intake CAM error

  0 < Engine Speed calculated on last crankshaft tooth period < 416 rpm