Setup for Component Replacement

The replacement of some components will require a setup procedure for complete repair.

• If any of the following components are replaced, an Idle Learn Procedure must be performed. Refer to the appropriate procedure:
  • Idle Learn Procedure for the 1.6L (L91) engine
    • Throttle body assembly
    • ECM
• If any of the following components are replaced, a CKP Variation Learn Procedure must be performed. Refer to the appropriate procedure:
  • CKP System Variation Learn Procedure for the 1.6L (L91) engine
    • CKP sensor
    • Engine replacement
    • Any engine repair that disturbs the relationship between CKP sensor and the crankshaft reluctor wheel.