LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Repair Instructions >> Stabilizer Link Removal and Installation >> Installation

Stabilizer Link Removal and Installation: Installation

  1. Install the stabilizer link.
  2. Install the stabilizer link-to-strut assembly nut.

    Tighten: 

    Tighten the stabilizer link-to-strut assembly nut to 47 N.m (35 lb-ft).

  3. Install the stabilizer shaft-to-stabilizer link nut.

    Tighten: 

    Tighten the stabilizer shaft-to-stabilizer link nut to 47 N.m (35 lb-ft).

    Fig 1: Identifying Stabilizer Shaft-To-Stabilizer Link Nut
    G04716781Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals