Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Application | N.m | Lb-Ft | Lb-In |
|---|---|---|---|
| Air Filter Housing Assembly Bolts | 6 | - | 53 |
| High-Pressure Hose Fitting | 28 | 21 | - |
| Power Steering Pump Bolts | 25 | 18 | - |
| Power Steering Pump Pulley Nut | 61 | 45 | - |
| Right Side Power Steering Pump Bracket Bolts | 35 | 26 | - |
| Adjuster Plug | 7 (minus 30° - 40°) | - | 62 (minus 30° - 40°) |
| Adjuster Plug Locknut | 75 | 56 | - |
| Control Module Bracket Bolts | 7 | - | 62 |
| Dash Seal Retaining Ring Nuts | 7 | - | 62 |
| Hydraulic Cylinder Line Fittings - Cylinder End | 28 | 21 | - |
| Hydraulic Cylinder Line Fittings - Valve End | 18 | 13 | - |
| Inner Tie Rods | 100 | 74 | - |
| Intermediate Shaft Pinch Bolts - Upper and Lower | 25 | 18 | - |
| Maximum Pinion Preload | 1 | - | 9 |
| Outer Tie Rod Adjusting Nut | 64 | 47 | - |
| Outer Tie Rod Nuts | 50 | 37 | - |
| Pinion Locknut | 30 | 22 | - |
| Steering Gear Inlet and Outlet Pipe Fittings | 28 | 21 | - |
| Steering Gear Mounting Bracket Nuts and Bolts | 60 | 44 | - |
| Transaxle Center Bracket-to-Engine Bolt | 80 | 59 | - |
| Transaxle Center Bracket-to-Transaxle Bolts | 80 | 59 | - |
| SSPS Control Module Bolts | 9 | - | 80 |
| Power Steering Pump Pressure Line Fitting | 28 | 21 | - |
| Return Line Securing Bracket Bolts | 8 | 6 | - |