LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 1.6L (L91) - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Manifold Absolute Pressure Sensor
    GM1348510Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the MAP sensor with the bolt.

    Tighten:  Tighten the MAP sensor bolt to 10 N.m (89 lb in).

  2. Connect the MAP sensor electrical connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals