LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 1.6L (L91) - Introduction >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Tank
    GM1530532Courtesy of GENERAL MOTORS CORP.
  1. Connect the rear fuel hose.
  2. Install the fuel tank. Refer to Fuel Tank Replacement .
    3. Fig 2: Removing And Installing Fuel Pump Access Cover
    GM1376163Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel pump access cover. Refer to Fuel Sender Assembly Replacement .
    4. Fig 3: View Of Undercarriage
    GM1530162Courtesy of GENERAL MOTORS CORP.
  4. Install the fuel pipe.
  5. Install the fuel pipe mounting screws and cover
    6. Fig 4: View Of Pipe Clamps
    GM1530161Courtesy of GENERAL MOTORS CORP.
  6. Install the fuel pipe mounting plastic bolt.
    7. Fig 5: Disconnecting And Connecting Fuel Pipe Rear Fuel Hose
    GM1530527Courtesy of GENERAL MOTORS CORP.
  7. Connect the rear fuel hose to the fuel pipe.
    8. Fig 6: Disconnecting And Connecting Fuel Pipe Front Fuel Hose
    GM1530526Courtesy of GENERAL MOTORS CORP.
  8. Connect the front fuel hose to the fuel pipe.
  9. Lower the vehicle.
    10. Fig 7: View Of Fuel Rail Front Fuel Hose
    GM1530525Courtesy of GENERAL MOTORS CORP.
  10. Connect the fuel hose to the fuel rail.
  11. Connect the negative battery cable, if disconnected.
scientia non olet · About LEMON Manuals