LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 1.6L (L91) - Introduction >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Engine Coolant Temperature Sensor
    GM1289410Courtesy of GENERAL MOTORS CORP.
  1. Relieve the coolant system pressure.
    2. CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  2. Disconnect the negative battery cable.
  3. Drain the coolant below the engine coolant temperature (ECT) sensor level.
  4. Disconnect the ECT sensor connector.
    5. NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.
  5. Remove the ECT sensor.
scientia non olet · About LEMON Manuals