LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 1.6L (L91) - Introduction >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Engine Coolant Temperature Sensor
    GM1289410Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the ECT sensor.

    Tighten:  Tighten the ECT sensor to 20 N.m (15 lb ft).

  2. Connect the ECT sensor connector.
  3. Fill the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals