LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2005 >> Swift + >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Front Pipe Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to Exhaust Service Caution in Cautions and Notices.
    Fig 1: View Of Heated Oxygen Sensor And Electrical Connectors
    GM1241945Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear heated oxygen sensor.
    2. Fig 2: View of Connecting Pipe Mounting Bracket
    GM1241944Courtesy of GENERAL MOTORS CORP.
  2. Remove the connecting pipe mounting bracket bolt.
  3. Remove the connecting pipe nuts and the gasket from the catalytic converter.
    4. Fig 3: View Of Muffler And Pipe
    GM1241655Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts from the front muffler pipe to the connecting pipe.
  5. Clean the sealing surfaces on the front muffler pipe flange and the connecting pipe.
  6. Check the connecting pipe for holes, damage, open seams, or other deterioration which could permit exhaust fumes to seep into the passenger compartment.
scientia non olet · About LEMON Manuals