Section 146 (On-Vehicle Service)
WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- General Description
- Engine Diagnosis
- Special Tools
- On Vehicle Service
- Engine Assembly
- Crankshaft Pulley
- Camshaft And Valve Stem Seal
- Removal And Installation
- Notes
- Removal Service Points
- Installation Service Points
- >> A << Valve Stem Seals Installation
- >> B << Valve Springs Installation
- >> C << Valve Spring Retainer Locks Installation
- >> D << Rocker Arm, Shaft And Lash Adjuster Assembly/Rocker Shaft Springs/Rocker Arm, Shaft, Lash Adjuster And Spring Assembly Installation
- >> E << Rocker Arm, Shaft And Lash Adjuster Assembly Installation
- >> F << Camshaft Oil Seal Installation
- >> G << Camshaft Sprocket Installation
- >> H << Camshaft Position Sensor Support Installation
- Removal And Installation
- Oil Pan
- Crankshaft Oil Seal
- Cylinder Head Gasket
- Timing Belt
- Removal And Installation
- Notes
- Removal Service Points
- Installation Service Points
- << A >> Balancer Timing Belt/Balancer Timing Belt TENSIONER Installation
- >> B << Balancer Timing Belt Tension Adjustment
- >> C << Crankshaft Angle Sensing Blade/Crankshaft Camshaft Drive Sprocket Installation
- >> D << Timing Belt TENSIONER Adjuster Installation
- >> E << Timing Belt TENSIONER Pulley Installation
- >> F << Valve Timing Belt Installation
- >> G << Valve Timing Belt Tension Adjustment
- >> H << End Cap Installation
- Inspection
- Removal And Installation
- Specifications