LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnect/Connect Procedure >> Installation Procedure

Installation Procedure

  1. Verify that all the electrical components are OFF such as interior lights, all doors are closed, the underhood lamp, etc.
  2. Clean corrosion from the negative battery cable using a metal brush.
  3. Install the battery negative cable to the battery.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the clamping bolt to the negative cable.

    Tighten:  Tighten the battery negative cable to 4.5 N.m (40 lb in).

  5. Reset the radio stations and the clock.
scientia non olet · About LEMON Manuals