LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2004 >> Swift + >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Lamp Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Lamp Control Module
    GM1376092Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the lamp control module with the screws.
  2. Connect the electrical connector.
  3. Install the instrument panel low cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals