LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2003 >> XL-7 Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Engine Controls - System & Component Testing) >> Fuel Systems >> Fuel System Pressure Release >> Lancer, Lancer Evolution VIII & Outlander

Lancer, Lancer Evolution VIII & Outlander

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear seat assembly. Remove the protector. Disconnect the fuel pump module connector. See Fig 1-Fig 3. After starting the engine and letting it run until it stops naturally, turn the ignition off. Connect the fuel pump module connector. Install the protector and rear seat assembly.

Fig 1: Fuel Pump Module Connector (Lancer)
G00229857Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Fuel Pump Module Connector (Lancer Evolution VIII)
G00229858Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 3: Fuel Pump Module Connector (Outlander)
G00229861Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.