LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2003 >> Aerio GS, AWD, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications & Procedures >> Adjustments >> Toe-In Adjustment >> Rear

Toe-In Adjustment: Rear

  1. Measure toe-in with toe-in gauge and compare to WHEEL ALIGNMENT SPECIFICATIONS . See Figure. If toe-in is not within specification, go to next step.
  2. Loosen right and left control rod inner nuts. Rotate right and left control rod inner bolts (cam bolts) by the same amount to align toe-in to specification. See Fig 1. In this adjustment, right and left tie rods should become equal in length.
  3. After adjustment, tighten right and left nuts to specified torque while holding cam bolt with another wrench to prevent it from turning. See TORQUE SPECIFICATIONS .
Fig 1: Adjusting Rear Toe-In
G00276151Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals