LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2003 >> Aerio GS, AWD, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generators & Regulators >> Adjustments >> Battery Inspection >> Load Test

Load Test

  1. Connect voltmeter (1) and battery load tester (2) across battery (3) terminals. See Fig 1.
    Fig 1: Connecting Voltmeter & Battery Load Tester Across Battery Terminals
    G00784573Courtesy of SUZUKI OF AMERICA CORP.
  2. Apply 190 ampere load for 15 seconds to remove surface charge.
  3. Remove the load and wait 15 seconds to let battery recover.
  4. Apply 190 ampere load. Read voltage after 15 seconds.
  5. Remove the load.
    • The voltage does not drop below the minimum as listed in the figure.
      • Battery is good.
    • The voltage drops below the minimum as listed in the figure.
      • Replace the battery.
scientia non olet · About LEMON Manuals