LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2000 >> Swift GA, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self Diagnostics - Introduction >> Self-Diagnostic System >> Preliminary Diagnostic Procedure

Preliminary Diagnostic Procedure

NOTE: The following diagnostic procedure requires use of a scan tool. See SPECIAL TOOLS (DIAGNOSTIC)  .

Diagnosis of computerized engine control system should be performed in the following order:

  1. Verify customer complaint. Using scan tool, obtain and record DTC and freeze frame data. Erase DTCs if present. See MALFUNCTION INDICATOR LIGHT (MIL) RESET PROCEDURE  . Perform a visual inspection and ensure all engine systems not related to computer are operating properly. DO NOT proceed with diagnosis unless all other problems have been repaired.
  2. Using scan tool, attempt to retrieve DTCs once more. If DTC(s) are present, perform appropriate diagnostic test. See DIAGNOSTIC TESTS in appropriate SELF-DIAGNOSTICS article. If DTC(s) are not present, and a driveability problem or intermittent problem is present, go to TROUBLE SHOOTING - NO CODES article.
NOTE: ALWAYS erase DTCs, confirm closed loop operation, and test drive vehicle after repairs are completed. Ensure MIL DOES NOT illuminate.
scientia non olet · About LEMON Manuals