LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1997 >> Sidekick JS, 2D Utility, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 1.8L >> Circuit Tests >> Circuit Test B-1: Fuel Injector Circuit Inspection

Circuit Test B-1: Fuel Injector Circuit Inspection

  1. Using a mechanic's stethoscope, check each fuel injector for operating sound as engine is cranked. If all 4 fuel injectors made operating sound, system is okay. If no injectors made sound, go to next step. If one or more fuel injector(s) do not make sound, check for faulty injector harness, injector(s) or poor connections. If injector harness, injector(s) and connections are okay, replace PCM. Retest system.
  2. Turn ignition off. Disconnect harness connector from No. 1 fuel injector. Turn ignition on. Using a voltmeter, measure voltage between ground and Blue/Black wire terminal of connector. If battery voltage exists, go to next step. If battery voltage does not exist, repair power circuit for an open or short. See WIRING DIAGRAMS - 1.8L article.
  3. Turn ignition off. Disconnect PCM harness connectors. On models with manual transmission, check for continuity between PCM harness connector "C", terminal No. 11 and PCM harness connector "B", terminals No. 12, 13, 25 and 26. On models with automatic transmission, check for continuity between PCM harness connector "A", terminal No. 8 and PCM harness connector "D", terminals No. 1, 2, 8, 20. If continuity is not present at specified terminals, go to next step. If continuity is present at specified terminals, replace PCM. Retest system.
  4. Measure resistance of each injector whose circuit did not show continuity. See SPECIFICATIONS - 1.8L article for resistance specifications. Repair as necessary. If injectors are okay, replace PCM. Retest system.
scientia non olet · About LEMON Manuals