Park/Neutral Position Switch (A/T)
NOTE:
Park/neutral position switch may also be referred to as transmission range switch.
- Apply parking brake. Disconnect wiring harness electrical connector at park/neutral position switch, located on side of transmission. See Figure .
- Using ohmmeter, check for continuity between specified wire colors on electrical connector at park/neutral position switch with shift lever in specified positions. See PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS table. If proper continuity does not exist, adjust or replace switch as necessary.
PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS
| Lever Position | Continuity Between Wires |
|---|---|
| Park | Black Wire & Blue/White Wire; Black/Red Wire & Black/Yellow Wire |
| Reverse | Red Wire & Yellow Wire |
| Neutral | Black Wire & Blue Wire; Black/Red Wire & Black/Yellow Wire |
| Drive | Black Wire & Green Wire |
| 2 | Black Wire & Green/Red Wire |
| Low | Black Wire & Green/Blue Wire |