LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1995 >> Swift Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body (TBI) >> Installation

Throttle Body (TBI): Installation

  1. Install NEW throttle body base gasket on intake manifold. Install throttle body. Tighten throttle body mounting bolts to specification. See TORQUE SPECIFICATIONS .
  2. Connect fuel feed pipe with NEW "O" ring. Tighten fuel feed pipe bolts to specification. To complete installation, reverse removal procedure. Refill cooling system. Connect negative battery cable.
  3. Turn ignition on, engine off. This will activate fuel pump. Check for fuel leaks. Adjust accelerator cable, A/T kickdown cable (if equipped) and throttle position sensor. See the BASIC TESTING article.
scientia non olet · About LEMON Manuals