LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1994 >> Swift GA, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.3L DOHC >> Fuel System >> Throttle Position Sensor (TPS) >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Unplug TPS harness connector. Remove TPS from throttle body.
  2. To install TPS, reverse removal procedure. Adjust TPS. See ADJUSTMENTS - 1.3L DOHC article in this section. Tighten TPS mounting screws to specification. See TORQUE SPECIFICATIONS  table.