LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1994 >> Sidekick JS, 4D Utility, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.6L MFI >> Fuel System >> Oxygen Sensor (O2S) >> Removal & Installation

Removal & Installation

  1. Ensure engine is cool before removing O2S. Disconnect negative battery cable and then O2S connector.
  2. Remove exhaust manifold upper cover. Remove O2S from manifold. To install O2S, coat threads with anti-seize compound. Tighten O2S to specification. See TORQUE SPECIFICATIONS  table. Connect negative battery cable. Install exhaust manifold upper cover. After installing O2S, start engine and check for exhaust leaks.
scientia non olet · About LEMON Manuals