LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1994 >> Samurai >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.3L TBI >> Fuel System >> Fuel System Pressure Release

Fuel System Pressure Release

  1. Place transmission in Neutral (M/T) or Park (A/T). Set parking brake and block drive wheels. Disconnect fuel pump relay connector. Fuel pump relay is located on right kick panel, above ECM. See Fig 1 .
  2. Remove fuel filler cap to release fuel vapor pressure in fuel tank.
  3. Reinstall fuel filler cap. Start engine and run until engine dies. After engine dies, crank engine 2-3 times for about 3 seconds to dissipate fuel pressure in lines. To restore normal operation, reconnect fuel pump relay connector.
Fig 1: Locating Fuel Pump Relay
G90J20239Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals