LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1993 >> Swift GA, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Position Sensor (TPS) >> Removal (Samurai & Sidekick TBI)

Removal (Samurai & Sidekick TBI)

  1. Disconnect negative battery cable. Unplug TPS wiring harness connector.
    NOTE: If TPS is being replaced, wiring may have to be removed from connector. Note wire colors and placement before removal.
  2. If wiring is being removed from connector, unlock terminal locks and pull TPS wiring harness from connector. See Fig 1 . Remove mounting bolts. Remove TPS from throttle body.
Fig 1: Remov. Throttle Position Sensor Wiring Harness From Connector (Samurai & Sidekick TBI)
G119658Courtesy of SUZUKI OF AMERICA CORP.