LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 1993 >> Sidekick JS, 2D Utility, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body (TBI) >> Removal (Swift SOHC)

Removal (Swift SOHC)

  1. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Disconnect negative battery cable. Drain engine coolant so level is below throttle body. Remove air intake case from throttle body and air cleaner.
    NOTE: DO NOT  remove either the fuel pressure regulator or the air valve from throttle body. They are factory installed and adjusted.
  2. Disconnect throttle position sensor, fuel injector, and water temperature sensor connectors. Disconnect and mark fuel, engine, cooling, and vacuum hoses to throttle body. Disconnect accelerator cable from throttle valve lever and cable bracket. Remove throttle body from intake manifold.
NOTE: DO NOT  soak injector or any electrical device in any type of solvent or cleaner.
scientia non olet · About LEMON Manuals